PoE in-wall AP 2T2R 300Mbps Qualcomm Atheros AR9341 OpenWrt or Linux Firmware Featured

VWP305Q PoE In-wall AP 2T2R 300Mbps Qualcomm Atheros AR9341 OpenWrt or Linux Firmware VWP305Q PoE In-wall AP 2T2R 300Mbps Qualcomm Atheros AR9341 OpenWrt or Linux Firmware

VWP305Q is a 300Mbps 2T2R wireless in-wall AP(Access Point) with PoE (Power over Ethernet) support, which offers users extended coverage, more secure network management and simpler connection. The standard PoE interoperable of 802.3af makes internet connection more flexible. It can come with either our Linux or OpenWrt firmware.

VWP305Q 2.4GHz PoE wall-mounted AP, based on Qualcomm Atheros AR9341, provides extended coverage with stable and secure WiFi connection. It also comes with a USB charger of 1A output for mobile devices, 2 RJ 45 ports for cabled LAN, and 1 RJ11 port for telephone.

VWP305Q is designed as panel access point which will not violate your interior decoration. Only 3-step setting makes the implement simpler. VWP305Q is the perfect choice for internet coverage for rooms for a secure , convenient, and artistic design to connect multiple Wi-Fi enabled devices such as portable multimedia devices, gaming controllers, Laptops etc.

To facilitate multiple in-wall AP implementation in big building of many rooms, we offer management software working in Windows to control and configure the ceiling APs one by one or by group simply, or the ceiling AP can be controlled by a hardware AC.

 Simple control and configuration by hardware AC or our software AC(*)
 Qualcomm Atheros chipset for high performance with stability
 PoE (IEEE 802.3af)
 Linux SDK-based and/or OpenWrt firmware available
 Multi-operation mode: AP/Router/Wireless Bridge/Wireless Repeater
 High transmission power and receiving sensitivity for widest coverage
 Simple setup wizard with web-based utility
 Throughput up to 300Mbps
 Multiple SSID up to 4
 Port based VLAN
 Output power adjustable & ACK timeout
 WPA2/WPA/AES/TKIP,SSH and 802.1x Authenticator
 Firewall, IP/Port/MAC and URL filtering
 QoS: Traffic Control & WMM
 Traffic statistics based port
 Built-in NAT and DHCP Server & Client
 TCP/UDP/ICMP/ARP protocol stack
 Supports UPnP, Dynamic DNS, Static Routing
 Supports PPPoE, Dynamic IP, Static IP Internet Access
 Wireless user access control(ACL)
 Reboot policy based fixed time, On Demand, Idle etc
 2 * LAN and 1* WAN(10/100Mbps) with PoE
 Internal 5dBi omni-directional antenna

(*Configurable by Software AC refers to the Ceiling AP built with our Linux-based firmware)


Software Features
System Requirement
System Support Windows7, XP, 2000, NT, Me, 98, Mac OS X (10.4+), Linux
Access Method Web Based (HTTP 1.0 / 1.1)
Browser Compatibility Microsoft IE 6.0 or above, Firefox 2.0 or above
System Status System Information System Up Time, Device Name, Wireless MAC, LAN MAC, Country, Current Time, Firmware Version
Current IP Setting IP Address, Subnet Mack, Default, Gateway, DHCP, DNS
Current Wireless Setting Operation mode, Wireless Mode, Channel/Frequency, L2 Isolation, MSSID Setting
Client List List current associated clients. Show only authorized and associated clients
System Log Displays a list of events triggered
Wireless Function List
Operation Mode AP/Router/Wireless Bridge/Wireless Repeater
802.11 mode options b/g/n 20/40MHz
Channel setting Manual
Auto / Best Channel Selection
Transfer rate setting Auto and Manual
Output Power Control High / Medium / Low
Multiple BSSID (Multi AP)  4 BSSID for 2.4GHz
Security WEP WEP(64/128 bit)
Hidden ESSID Y
MAC address filtering MAC address filtering (Both in WLAN and LAN)
L2 Isolation Y
802.1x Authentication MD5/ TLS/ TTLS, PEAP (Nice to Have)
802.1x Supplicant TTLS, PEAP (Nice to have)
LAN Settings IP(check validity and DHCP server IP range)
DHCP server DHCP Range, Lease Time, Client list
SNMP SNMP V1/V2C SNMP Active: Disabled / Enabled
SNMP Version : V1/V2c/ALL
Read Community
Set Community
System Location
System Contract
MIBI,MIBII Trap Active : Disabled / Enabled
Private MIB Trap Manager IP 
Administration User Name (set as “admin”)
Password (can be changed by user)
Confirmed Password
Backup/ Restore Setting Save Current Setting
Restore Saved Setting
Reset to Factory Default 
Firmware Upgrade Firmware Upgrade
Hardware Specifications
CPU Qualcomm Atheros AR9341
Memory 64MB(128MB Optional)
Flash 8MB(16MB Optional)
Physical Interface WAN: 1 * 10/100 Fast Ethernet RJ45 (802.3af PoE supported)
LAN: 2 * 10/100 Fast Ethernet RJ45
RJ11: 1*RJ11 port for telephone
USB: USB2.0*1 as USB Charger
LED Definition Power 1
Wireless Specifications
Frequency Band 2.4002.484 GHz(11b, 11g, 11n)
Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operating Channels 11Ch for North America, 14Ch for Japan, 13Ch for Europe
Wireless Setting Operation Mode: AP/Router/Wireless Bridge/Wireless Repeater
Wireless Mode: 11b/ 11g /11n
Channel Selection: (Setting varies by Country)
Channel Bandwidth: (Auto, 20Mhz, 40Mhz)
Transmission Rate: 11n only ,11b/g/n mix ,11b only ,11b/g
Receive Sensitivity (Typical)  2.412 ~ 2.472 GHz (11b) up to -92 dBm
2.412 ~ 2.472 GHz (11g) up to -89 dBm
2.412 ~ 2.472 GHz (11n) up to -88 dBm
Transmit power 11b 1Mbps - 11Mbps 20dBm
11g 6Mbps - 9Mbps 20 dBm
12Mbps - 18Mbps 19 dBm
24Mbps - 36Mbps 18 dBm
48Mbps - 54Mbps 17 dBm
11n MCS 0-1 / 8-9 18 dBm
MCS 2-3 / 10-11 17 dBm
MCS 4-5 / 12-13 17 dBm
MCS 6-7 / 14-15 17 dBm
Antenna Internal 5dBi antenna*2
Environmental and Mechanical
Temperature Range 0 to 50° C - Operating, -20 to 60 ° C - Storage
Humidity (non-condensing) 90% or less – Operating, 90% or less - Storage
Package Content
VWP305Q In-wall AP
Quick Installation Guide * 1


Additional Info

  • Mount Type: In-wall
  • Chipset: Atheros 9341
  • Operation Mode: AP+Repeater
  • WiFi Frequency: 2.4GHz
  • WiFi Data Rate: 300Mbps
  • Power Level: Standard
  • Power Supply: PoE 48v

Product Shortcut

Quick Contact

Hotline: 86-755-2791-0303
Skype: visonicom
ICQ: 77681269
QQ: 36554529