ADSL 2/2+ Modems and Routers, Wireless ADSL 2/2+ Routers

Visonicom wireless 11ac router dual band VAC1201M, based on Mediatek MT7621AT SoC, armed with the new generation 802.11ac Wi-Fi technology, offers users simultaneous dual band connection of 867Mbps wireless speeds over 5GHz band and 300Mbps over the 2.4GHz band. It is ideal for faster downloading, online gaming, Internet calling and HD video streaming.

Visonicom 11ac WiFi router 1200Mbps dualband VAC1201M supports AP, gateway, repeater modes, providing various wireless solution to build or extend the wireless network. Based on the new generation of Wi-Fi technology- 802.11ac, the Visonicom router VAC1201M delivers wireless high speed up to 1200Mbps (2T2R 867Mbps over 5GHz + 2T2R 300Mbps over 2.4GHz).

Equipped with one 5GHz 5dBi Antenna and two 2.4GHz 5dBi Antenna, the Visonicom 11ac wireless router VAC1201M allows you to enjoy the wireless freedom with incredible signal and coverage in any large home or office.

Visonicom 11ac WiFi router dual band VAC1201M works on both 2.4GHz and 5GHz wireless bands simultaneously, to support general tasks like web surfing, e-mailing and file sharing both on 2.4GHz band and 5GHz band for Wi-Fi gaming, HD media streaming, and VoIP phone calling.

The Visonicom 11ac router dualband WiFi VAC1201M supports up to 8 different wireless networks at the same time to set up multiple wireless networks for family and guests. Once logging into the firmware management page, users can immediately get the Configuration Wizard to configure the Internet and wireless settings quickly.

Specifications

Wireless
Standards IEEE 802.11b/g/n 2.4GHz
IEEE 802.11a/n/ac 5GHz
Frequency Range 2.4-2.4835GHz, 5.180-5.825GHz
Transmit Power 17dBm
Signal Rate Up to 867Mbps(5GHz) + 300Mbps(2.4GHz)
Data Transfer Rate 802.11ac: 867Mbps(80MHz)
802.11n: 300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30Mbps (40MHz) ; 144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps (20MHz, Auto-Sense)
801.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps
802.11b: 11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps
Wireless Mode AP, Gateway, Repeater…customizable
Wireless Security  64/128-bit WEP
WPA-PSK/WPA2-PSK (TKIP/AES)
SSID Broadcast Enable/Disable
Wireless MAC Filtering
Hardware
Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Chipset Mediatek MT7621A + MT7612E
Memory Size Customizable
Ethernet Interface 1 *10/100/1000M Auto MDI/MDIX RJ45 WAN port
4 *10/100/1000M Auto MDI/MDIX RJ45 LAN port
USB USB3.0 (optional)
LED PWR, WPS, SYS, 2.4G, 5G, LAN1 ~4, WAN, WPS
Button Reset, WPS
Antenna 4* external 5dBi antenna, omni-directional - customizable
Power Supply DC12v1A
Software
Functions & Features Customizable
Packing and Environmental
Environmental Operating Temperature: 0~40
Storage Temperature: -40~70
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Package 1 * VAC1201M Wireless Router
1 * 12v/1A Power Adapter
1 * Quick Installation Guide

Key Parameters:

  • Chipset Mediatek MT7621AT
  • Firmware OpenWrt/Linux SDK
  • WiFi Frequency 5GHz 11ac + 2.4GHz 11n
  • WiFi Data Rate 1.2Gbps
  • WiFi Power Standard
  • Internet Access Mode PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP, AP Client(Repeater), PPPoE + DHCP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater
  • WAN Port RJ45 Gigabit Ethernet * 1
  • LAN Port RJ45 * 4 Gigabit
  • USB Port USB3.0*1(Optional)
  • FXS port NA

Visonicom RealCast PTV box VRD-PTV305 is an excellent dualband(2.4GHz+5GHz) superior screen mirroring adapter box that supports WiDi, Miracast, AirPlay, DLNA, AirParrot, MirrorOP and AirPin for 1080P HD video WiFi screen mirroring and streaming.

The built-in dualband WiFi module supports 2.4GHz and 5GHz to avoid radio interference for better and more stable wireless display performance.


Visonicom RealCast PTV boxes are superior WiFi display adapters that supports:
* Miracast: For Andorid 4.2+, Windows 8.1+ with latest hardware;
* AirPlay, for iOS6+;
* DLNA: For Andorid 4.0+, iOS6.0+, Windows 7+, with DLNA enabled APP/Software such as AirFun, BubbleUPnP, KODI(XBMC), etc;
* WiDi: For WiDi-capable Windows PC;
* MirrorOP: For Android, iOS, Windows, Mac;
* AirParrot: For Mac OS, Windows, Chrome OS;
* AirPin: For Windows, Android, iOS

With the universal wireless screen mirroring device RealCast PTV box users can easily mirror/push the HD video, photo, game saved locally or online contents from the following devices to HDTV or projector through HDMI port wirelessly.
* Windows PC/Notebook: Miracast/WiDi/DLNA/MirrorOP/AirParrot/AirPin;
* Android phones/tablet PCs: Miracast/DLNA/MirrorOP/AirPin;
* iPad/iPhone: AirPlay/DLNA/AirParrot/MirrorOP/AirPin;
* Mac PC/Macbook: MirrorOP/AirParrot;
* Chromebook: AirParrot


2. Product Features:
* Cross Platforms support: iOS, Android, Windows, Mac OS and Chrome OS
* H.264 1080P full HD video hardware decoder
* Less than 100ms latency
* Most Standard Support: Miracast, AirPlay, DLNA, WiDi, MirrorOP, AirParrot, AirPin
* Large RAM and ROM for low latency and fast connection
* 2.4G/5G dualband 300Mbps WiFi, even stronger and better WiFi transmission.
* Simplest to operate
* LPCM Audio Decode
* HDMI v1.3 output (Additional CVBS AV port, optional)
* HDCP 2.x
* Auto WiFi channel selection with high quality video stream
* Most powerful and stable among similar products
* Firmware online upgrading for new function and latest technology support.

Specifications:

Hardware
Operating system Linux
Language English, Chinese,...Multilingual supported
Chipset Realtek RTD1185
RAM DDR3 2Gb
Flash 2Gb
Transmission Distance Up to 20M to playback music, photo and pdf files, Up to 15M to playback video files.
Network WiFi 802.1 a/b/g/n 2.4GHz+5GHz up to 300+300Mbps
Power Supply DC 5V/500mA
Physical Interface
AV Out-Put 1*HDMI A-Type, HDMI1.3
USB 1*Micro USB(For Power Supply, USB drive, or USB network adapter) for power supply
Media Support
Video Resolution Full HD1920*1080, 1280*720, 720*480
Video Decoder Support H.264,VP8,RV,WMV,AVS,H.263,MPEG4…etc Video Formats decode with 1080P, Support avi, vob, mkv, ts, m2ts, rm, f4v, flv, mpg/mpeg, mov…etc formats.
Audio Container Support MP3, WMA, AAC, WAV, OGG, REAL audio, ALAC…etc formats,Also support FLAC, APE HD Hi-Fi Audio formats.
Image Format Support JPEG, BMP, GIF, PNG, TIFF,Support 8000*8000px Resolution of high-definition digital photos
Software Download Online firmware auto update for the hardware
Transmission Protocol Support (Miracast, DLNA, Airplay, WiDi)
Physical and Environmental
Operation Temperature -10~40
Storage Temperature -20~50
Humidity environment 5%-90%(No condensation)
Accessories
Standard Package: RealCast PTV box*1, USB Cable *1, Manual *1, HDMI Cable *1

Key Parameters:

  • Protocol Support Miracast/WiFi Direct, DLNA, WiDi, AirPlay, MirrorOP, AirParrot, AirPin
  • WiFi Frequency 2.4/5G Dualband
  • WiFi Data Rate 300Mbps
  • OS Support Android, iOS, Windows, Mac OS, Chrome OS
  • Chipset Realtek RTD1185

VWN332M is an OpenWrt WiFi router 2.4GHz 2T2R 300Mbps based on Mediatek MT7620N SoC with 8MB Flash & 64MB RAM.

The firmware of the wireless OpenWrt router is based on OpenWrt Chaos Calmer 15.05 with advanced WiFi features and functions, meanwhile it is very convenient and capable for comprehensive customization according to OEM/ODM requirement to allow this affordable WiFi router to perform just as well as any noble WiFi router…

Hardware Specification

Product VWN332M wireless router OpenWrt
Chipset Mediatek MT7620N
Flash + SDRAM 8MB Flash + 64MB DDRAM
WAN Port 10/100M UTP Port * 1 (Auto MDI/MDI-X)
LAN Port 10/100M UTP Port * 4 (Auto MDI/MDI-X)
Frequency Band 2.4000~2.4835GHz (ISM Band)
Data Rate 11b: 1/2/5.5/11Mbps
11g: 6/9/12/24/36/48/54Mbps
11n (20MHz): MCS0-7, up to 144Mbps
11n (40MHz): MCS0-7, up to 300Mbps
Output Power 11b: 17±1.5dBm, 
11g: 14±1.5dBm, 
11n: 14±1.5dBm (w/o antenna)
Antenna 5dBi External antenna * 2 (2T2R)
Power Adapter 5vDC, 1A switching power adapter
Operating Temperature 32~104°F (0~40°C)
Storage Temperature -4~140°F (-20~60°C)
Operating Humidity 10~90% (Non condensing)
Storage Max. 95% (Non condensing)

Key Parameters:

  • Chipset Mediatek MT7620N
  • Firmware OpenWrt/Linux SDK
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 300Mbps
  • WiFi Power Standard
  • Internet Access Mode PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater, WISP, Printer Sever and More
  • WAN Port RJ45 Fast Ethernet * 1
  • LAN Port RJ45 * 4*100Mbps
  • USB Port N/A
  • FXS port NA

This Android-2-TV HDMI cable (VTC-A5) is for screen mirroring of Smartphones/Tablet PCs with Micro USB connector to TV or projector with HDMI port, especially when the TV/projector or the smartphone/tablet PC doesn't support Miracast or MHL. With this Phone-2-HDMI TV adapter cable you can use the TV to share videos and slide shows together with family and friends, or connect it to projector in meeting and presentation.

The Android-2-HDMI TV cable looks like a MHL cable but much more than it.

The Phone-2-TV cable comes with a MicroUSB port, a HDMI port, and a USB port.

The micro USB port is to connect to Android phones/tablet PC for video and audio out, while the HDMI port is to mirror the video and audio to a HDTV or projector, and the USB port with connection to a USB charger or TV USB port for power supply to the Android-2-TV adapter cable, also for charging the smartphone/tablet PC at the same time.

This smart-phone-to-TV HDMI cable adapter with USB is compatible with the newest models of smartphones and tablet PC of Android 4.4 and greater.

Features:
- It is easy to use. This Android-to-TV HDMI adapter cable can mirror your screen of smart phone/tablet PC to HDTV, there's no additional APP needed for the job.
- It is Standalone. It is specially for Android device and TV without Miracast or MHL support.
- It is Super. Great mirroring performance
- It is Capable. Supports all smartphones and tablet PC of Android 4.4 and greater.
- It Supports. Charging and mirroring work simultaneously.

Package Contents:
- Android-2-TV HDMI adapter cable *1
- User's Guide *1

This iPhone 5/iPhone 6/iPhone7 to TV cable HDMI adapter is for mirroring the screen of iPhone/iPad with the lightning connector to HDTV/projector with HDMI port, when there's no WiFi AirPlay receiver or Apple TV. This iPhone Lightning to HDMI TV cable adapter can help you to share videos and slideshows together with family and friends with TV, or to connect to projector in meeting and presentation.

The iPhone HDMI TV cable adapter comes with a Lighting connector, a HDMI connector and a USB connector.

The iPhone Lighting port of the AirPlay HDMI TV cable is to connect to iPhone/iPad for video and audio out, the HDMI port is to output the video/audio with connection to a HDTV or projector, while the USB port is to connect to a USB charger for power supply to the iPhone TV cable, also for charging the iPhone/iPad when mirroring.

The iPhone 5/6 Lightning to HDMI TV adapter cable with USB port can work with the latest models of iPhone, iPad and iPod families.

Features:
- It is Simple to use. This AirPlay HDMI TV cable adapter can mirror your image/video from iPhone/iPad to TV, no APP needed.
- It is Wonderful. No Wireless AirPlay receiver or Apple TV needed.
- It is Capable. Great performance of AirPlay screen mirroring up to 1080P
- It is Works. Supports all iOS, no need to jailbreak, no worry of iOS upgrade.
- It Supports. Charging and mirroring work at same time.
- It is cost-effective

The AirPlay HDMI TV cable adapter is compatible with:
- iPhone 6/iPhone 6 plus/iPhone 6s/iPhone 6s plus and greater
- iPhone SE
- iPhone 5s/iPhone 5/iPhone 5c
- iPad Pro
- iPad Air2
- iPad Air
- iPad 4
- iPad Mini 4
- iPad Mini 3
- iPad Mini 2
- iPad Mini 1
- iPod Touch 6


Notes:
- The idevice device must support "Personal Hotspot" function.
- If you use it with iPad, please make sure your iPad is WiFi + cellular version, since as far as we know for some countries, the iPad family can come as either WiFi or Cellular version, or support both WiFi and Cellular as premium version.

Package Contents:
- iPhone to TV HDMI adapter with USB port *1
- User's Guide *1

This Phone2TV EZWire iPhone and Android USB to TV universal HDMI cable is for mirroring iPhone/iPad with the lightning connector, Android Smartphones/tablet PC's with the MicroUSB port to a TV or projector through HDMI port, especially when there's no WiFi router, or no Apple TV for iPhone/iPad AirPlay mirroring, or no WiFi Miracast, or MHL support for Android smartphones/tablet PC mirroring. With this lightning and MicroUSB to HDMI cable adapter you can use the TV to share videos and slide shows together with family and friends, or connect it to projector for meeting and presentation.

It comes with a USB type-A female connector, a HDMI connector and a USB type-A connector.

The USB type-A female connector is to connect Android smartphones/tablet PCs, or iPhone/iPad for video and audio out, the HDMI port is to output the multimedia content to a HDTV or projector, while the USB port is to connect to a USB charger or your TV USB port for power supply to the adapter cable, also for charging the iPhone during mirroring.


Features:
* It is simple. This USB female connector with connection to lightning or MicroUSB port can mirror your image/video from your iPhone /iPad/Android phones/tablet PCs to your HDTV, no additional APP needed.
* It is standalone. No WiFi needed, No Apple TV needed, No Miracast needed, No MHL needed.
* It is powerful. Great mirroring performance
* It works. Supports all iOS, no need to jailbreak, no worry of iOS upgrade, and Android 4.4 or greater.
* It supports. Charging and mirroring work simultaneously.

Compatibility:
The AirPlay HDMI is compatible with:
- iPhone 5/6/7 families
- iPhone SE
- iPad Pro
- iPad Air2
- iPad Air
- iPad 4
- iPad Mini 4
- iPad Mini 3
- iPad Mini 2
- iPad Mini 1
- iPod Touch 6
For Android to HMDI it supports smartphones and tablet PC's of Android 4.4 or greater

Notes:
- Brand names and trademarks are properties of the respective holders and are referred to here for descriptive purpose only.
- The idevice device must support "Personal Hotspot" function.
- If you use it with iPad, please make sure your iPad is WiFi + cellular version, since as far as we know for some countries, the iPad family can come as either WiFi or Cellular version, or support both WiFi and Cellular as premium version.

Package Content:
- EZWire iPhone and Android USB to TV universal HDMI cable
- User's Guide *1

Wireless router VWN307M is a featured and powerful 300Mbps WiFi AP router based on Mediatek MT7620N with 5dBi high gain antennas featuring MIMO 2T2R technology, working at 2.4GHz frequency band. The 11n WiFi router is compliance with IEEE802.11n protocol and fully backward compatible with 802.11g and 802.11b standards.

The RJ45 WAN port of the 2T2R wireless AP router supports DHCP(Dynamic IP), PPPoE, Static IP, WISP, and PPPoE(Internet)+DHCP(IPTV) through only one physical WAN port for both internet access and IPTV broadcasting.

The 300Mbps wireless AP router VWN307M is simple to configure with the setup wizard. It can work as wireless gateway, wireless bridge and wireless ISP (WISP). It supports Multi SSID/Multi AP, QoS, WDS, WPS. It is designed for high sensitivity, long coverage and the wireless transmission power is adjustable.

For security in wireless communications, the 802.11n WiFi router VWN307M supports the latest WPA/WPA2 and multiple encryption types. VWN307M also supports AP Client function, to provide better wireless network extension applications.

Basic Features:
*Easy Setup
* 8/64MB large memory for stable heavy load
* Multimode support: Wireless gateway, wireless bridge, AP Client and wireless ISP (WISP)
* WAN support: DHCP(Dynamic IP), PPPoE, Static IP, WISP, PPPoE(Internet)+DHCP(IPTV)
* Multi SSID/Multi AP support
* IPv6 support
* vLAN support
* WISP support
* WDS support
* 5dBi high gain antenna
* Wireless Transmission Power Adjustable
* Automatic transmission rate detection network and transform
* QoS support
* WEP/WPA(TKIP)/WPA2(AES)/WPA2 Mixed support
* WPS support
* Fully compatible with IEEE802.11b/g/n

Specification

Wireless
Standard IEEE802.11b, IEEE802.11g, IEEE802.11n
Operation Mode Gateway/Bridge/AP Client/Wireless ISP
Data Rate Up to 300Mbps
Frequency Range 2.1~2.4835GHz
Operating Channels 1~11 (USA, Canada)
1~13 (Europe) 
1~14 (Japan),
According to country list
Spread Spectrum DSSS
Modulation type OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Transmission Distance Indoor up to 100m
outdoor up to 300m (depends on environment)
Receive Sensitivity@PE> 11n : -80dBm@10% PER
11g : -85dBm@10% PER
11b: -92dBm@8% PER
Transmit Power 11n :20dBm
11g : 23dBm
11b : 23dBm
Data Transfer Rate 802.11n: Up to 300Mbps
802.11g: Up to 54Mbps
802.11b: Up to 11Mbps
Encryption 64/128 bit WEP, WPA/WPA2/TKIP/AES encryption
Hardware
Chipset Mediatek MT7620N
Memory 8M ROM + 64MB RAM
Standard IEEE802.3 10Base-T, IEEE802.3u 100Base-TX
Interface 1*10/100M Auto MDI/MDIX RJ45 WAN port
4*10/100M Auto MDI/MDIX RJ45 LAN port
LED Power, WLAN, WAN, LAN*4
Antenna 3*external 5dBi high gain antenna
Power Supply DC 5v/1A
Software
WAN Type DHCP(Dynamic IP), PPPoE, Static IP, WISP, PPPoE+DHCP
Port Forwarding Virtual Severs, Port Triggering, UPnP, DMZ
QoS WMM, Bandwidth filtering
Access Control IP/MAC/Domain Filtering
IGMP Snooping
VPN Pass-through PPTP, L2TP, IPSec
Others
Environment Operating Temperature: -0°C~40°C
Storage temperature: -20°C~70°C
Work Humidity: 10% ~ 90% RH Non-condensing
Storage Humidity: 0% ~ 95% RH Non-condensing

 

Key Parameters:

  • Chipset Mediatek MT7620N
  • Firmware OpenWrt/Linux SDK
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 300Mbps
  • WiFi Power Standard
  • Internet Access Mode PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater, WISP
  • WAN Port RJ45 Fast Ethernet * 1
  • LAN Port RJ45 * 4*100Mbps
  • USB Port N/A
  • FXS port NA

VHR757Q is a High Power wireless 11ac router 750Mbps dual band based on Qualcomm Atheros QCA9531 with the new generation 802.11ac Wi-Fi technology. High transmission power 28dBi for 11n 300Mbps 2.4GHz and 22dBm for 11ac 433Mbps 5GHz simultaneous for long range covering, faster downloading, online gaming, Internet calling and HD video streaming. With 16/128MB large memory it offers more stable wireless connection long distance, also capable for deep customization with OpenWrt firmware.

Visonicom long range 11ac WiFi router 750Mbps dualband VHR757Q supports AP, Repeater, AP+WDS, WDS, Client modes, providing various wireless solution to build or extend the wireless network. Based on the new generation of Wi-Fi technology- 802.11ac, the Visonicom router VHR757Q delivers wireless high speed up to 750Mbps (1T1R 433Mbps over 5GHz + 2T2R 300Mbps over 2.4GHz).

Equipped with one 5GHz 5dBi Antenna and two 2.4GHz 5dBi high gain antenna, the Visonicom 11ac wireless router VHR757Q allows you to enjoy the wireless freedom with incredible signal and coverage in any large home or office.

Visonicom 11ac WiFi router dual band VHR757Q works on both 2.4GHz and 5GHz wireless bands simultaneously, to support general tasks like web surfing, e-mailing and file sharing both on 2.4GHz band and 5GHz band for Wi-Fi gaming, HD media streaming, and VoIP phone calling.

The Visonicom 11ac router dualband WiFi VHR757Q supports up to 8 different wireless networks at the same time to set up multiple wireless networks for family and guests. Once logging into the firmware management page, users can immediately get the Configuration Wizard to configure the Internet and wireless settings quickly.

Specifications

Wireless
Standards IEEE 802.11b/g/n 2.4GHz
IEEE 802.11a/n/ac 5GHz
Frequency Range 2.4-2.4835GHz, 5.180-5.825GHz
Transmit Power 27dBm for 11b, 23dBm for 11n, 21dBm for 11ac
Signal Rate Up to 433Mbps + 300Mbps
Data Transfer Rate                         802.11ac: 433Mbps(80MHz)
802.11n: 300Mbps, 270Mbps, 240Mbps, 180Mbps, 120Mbps, 90Mbps, 60Mbps, 30 (40MHz) ; 144Mbps, 130Mbps, 115Mbps, 86Mbps, 57Mbps, 43Mbps, 28Mbps, 14Mbps(20MHz, Auto-Sense)
801.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 11Mbps, 9Mbps, 6Mbps
802.11b: 11Mbps,9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps
Wireless Mode AP, WDS, AP+WDS, Repeater, Client, Multiple AP
Wireless Security    64/128-bit WEP,
WPA-PSK/WPA2-PSK (TKIP/AES)
SSID Broadcast Enable/Disable
Wireless MAC Filtering
Hardware
Chipset Qualcomm Atheros AR9531
Standards IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX
Interface 1 *10/100M Auto MDI/MDIX RJ45 WAN port
4 *10/100M Auto MDI/MDIX RJ45 LAN port
LED PWR, WPS, SYS, 2.4G, 5G, LAN1 ~4, WAN, WPS
Button Default, WPS
Antenna 3 * external 5dBi antenna, omni-directional
Power Supply DC12v1A
Software
WAN Type       DHCP, Static IP, PPPoE, L2TP, PPTP, Dual Access, WISP
Port Forwarding Virtual Servers, Port Triggering, UPnP, DMZ, FTP Private Port
QoS WMM, Bandwidth Control
Access Control IP/MAC/Domain Filtering
VPN Pass-through PPTP, L2TP, IPSEC
Others                              DDNS, Static Routing, WOL, Remote Management, Firmware upgrade, Backup & Restore
Packing and Environmental
Environment Operating Temperature: 0~40
Storage Temperature: -40~70
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Package 1 * VHR757Q Wireless Router
1 * 12v/1A Power Adapter
1 * Quick Installation Guide

Key Parameters:

  • Chipset Qualcomm QCA9531
  • Firmware OpenWrt/Linux SDK
  • WiFi Frequency 2.4GHz 11n/g/b
  • WiFi Data Rate 750Mbps
  • WiFi Power 29dBm 800mW High Power
  • Internet Access Mode PPPoE-ADSL/ONU, Dynamic IP, Static IP, PPTP, L2TP, WISP, AP Client(Repeater), PPPoE + DHCP
  • Operation Mode Wireless Router, AP/Gateway, AP Client/Repeater, WISP, Bridge
  • WAN Port RJ45 Fast Ethernet * 1
  • LAN Port RJ45 * 4*100Mbps
  • USB Port N/A
  • FXS port NA

Visonicom VFS108 is a 8-port fast Ethernet switch, which is the perfect choice to upgrade your previous network to 100Mbps. The switching hub connects up to 8 devices at speed up to 100Mbps. It provides you with an extremely smooth experience to enjoy high-performance, seamless, low-cost and easy-to-use 100Mbps network, ideal for multimedia, graphics, HD video and other applications that requiring large transferring allocation.

Easy to Use: Plug and play, hassle-free, no configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port detects the link speed of a network device (10/100Mbps) and intelligently adjusts for compatibility and optimal performance.

High Performance: Auto-negotiation RJ-45 ports can provide large file transferring and also be compatible with any 10/100Mbps Ethernet devices. Featuring non-blocking switching architecture, the product forwards and filters packets at full wire-speed for maximum throughput. IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode offer increased bandwidth to alleviate network congestion, making the switch work reliably.

Features
* Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3x standards
* 8 Auto-Negotiation, Auto-MDI/MDIX ports provide smart switching between 10Mbps and 100Mbps hardware
* Non-blocking switching architecture enables full wire-speed packets forwarding and filtering
* Supports MAC address auto-learning and auto-aging
* Fanless design ensures quiet operation without any noise
* Plug and Play design simplifies installation

Specifications:

General
Standards  IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Protocol CSMA/CD
Data Rate 10/100Mbps at Half Duplex
20/200Mbps at Full Duplex
Transmission Method Store-and-Forward
Switching Features MAC address auto-learning and auto-aging
Half and Full Duplex
1.6Gbps backplane bandwidth
Hardware
Interfaces 8 x 10/100Base-TX Port
1 x Power Connector
LED Indicators LAN1~LAN8, Power
MAC Address Table 1K entries per device
Power Supply Input: AC 100-240V, 50/60Hz  
Output: DC 5V 1A 
Dimensions (W×D×H) 130mm x 65mm x 22mm
Net Weight 95g
Gross Weight 145g
Environment
Operating Temperature 0°C~40°C (32°F~104°F) 
Storage Temperature -40°C~70°C (-40°F~158°F)
Operating Humidity 10%~90%, non-condensing
Storage Humidity 5%~90%, non-condensing
Certifications RoHS, CE
Package Contents
Package Contents 1 * 8-Port Desktop Switch
1 * Power Adapter 
1 * User Manual

Key Parameters:

  • Type Dumb Switch Fast Ethernet
  • No. of Ports 8
  • Chipset IC+ IP178G

Visonicom VFS105 is a desktop 5-port fast Ethernet switch, which is the perfect choice to for 100Mbps fast Ethernet. The switch connects up to 5 devices at speed up to 100Mbps. It provides you with an extremely smooth experience to enjoy high-performance, seamless, low-cost and easy-to-use 100Mbps network, ideal for multimedia, graphics, HD video and other applications that requiring large transferring allocation.
Easy to Use: Plug and play, hassle-free, no configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port detects the link speed of a network device (10/100Mbps) and intelligently adjusts for compatibility and optimal performance.
High Performance: Auto-negotiation RJ-45 ports can provide large file transferring and also be compatible with any 10/100Mbps Ethernet devices. Featuring non-blocking switching architecture, the product forwards and filters packets at full wire-speed for maximum throughput. IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode offer increased bandwidth to alleviate network congestion, making the switch work reliably.

Features
* Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3x standards
* 5 Auto-Negotiation, Auto-MDI/MDIX ports provide smart switching between 10Mbps and 100Mbps hardware
* Non-blocking switching architecture enables full wire-speed packets forwarding and filtering
* Supports MAC address auto-learning and auto-aging
* Plug and Play design simplifies installation

Specifications

General
Standards  IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Protocol CSMA/CD
Data Rate 10/100Mbps at Half Duplex
20/200Mbps at Full Duplex
Transmission Method Store-and-Forward
Switching Features MAC address auto-learning and auto-aging
Half and Full Duplex
1Gbps backplane bandwidth
Hardware
Interfaces 5 * 10/100Base-TX Port
1 * Power Connector
LED Indicators LAN1~LAN5, Power
MAC Address Table 1K-entry per device
Power Supply Input: AC 100-240V, 50/60Hz  
Output: DC 5V1A 
Dimensions (W×D×H) 90mm *57mm * 22mm
Net Weight 65g
Gross Weight 90g
Environment
Operating Temperature 0°C~40°C (32°F~104°F) 
Storage Temperature -40°C~70°C (-40°F~158°F)
Operating Humidity 10%~90%, non-condensing
Storage Humidity 5%~90%, non-condensing
Certifications RoHS, CE
Package Contents
Package Contents 1 * 5-Port Desktop Switch
1 * Power Adapter 
1 * User Manual

Key Parameters:

  • Type Dumb Switch Fast Ethernet
  • No. of Ports 5
  • Chipset IC+ IP175G
You are here: Home Broadband xDSL

Product Shortcut

Quick Contact

Hotline: 86-755-2791-0303
Email:market#visonicom.com
Skype: visonicom
ICQ: 77681269
QQ: 36554529